Completed Jobs by Bock Air Conditioning

June 29, 2026 | Springtown, TX

We installed a 3-ton heat pump, but at the time of installation there was no incoming power, so we had to return once power was available. During the startup, we found a faulty TXV at the air handler, replaced it, recharged the system with refrigerant, and verified everything is now ...

June 28, 2026 | Burleson, TX

Customer called because the home was not maintaining the set temperature. We found the indoor coil frozen upon arrival and the outdoor condenser dirty. We cleaned the condenser, checked the amp draw on the compressor, fan motor, and blower motor, and confirmed the system is now operating properly.

June 26, 2026 | Fort Worth, TX

Customer called because their A/C was not cooling. We found a failed ECM blower motor, and the indoor coil freezing from low airflow. We replaced the blower motor, checked the system, and confirmed everything is now running and cooling properly.

June 26, 2026 | Burleson, TX

Customer requested a maintenance inspection before moving into their new home. We thoroughly inspected the system, including the wiring, safety switches, drains, filters, and indoor coil, and found everything to be clean and in good working condition. The system is operating properly and is ready for the new homeowners.

June 26, 2026 | Fort Worth, TX

Customer called because their A/C system was not cooling properly. We went out and inspected the unit and found that the transformer had tripped, causing the system to stop operating. We reset the transformer, checked the system operation, and confirmed everything is running properly and cooling as it should.

June 23, 2026 | Forest Hill, TX

Customer called because their home was not cooling. We found a failed capacitor and replaced it. After the repair, we tested the system and confirmed everything is running and cooling properly.

June 23, 2026 | Burleson, TX

We installed a new line set to the downstairs air handler and recharged the system with refrigerant. After completing the installation, we tested the system and confirmed everything is running properly and cooling as it should.

June 22, 2026 | Azle, TX

Customer requested an A/C maintenance service and filter replacement. We performed a complete system inspection, replaced the filter, and checked all major components. The system is operating properly, and everything is running efficiently at this time.

June 22, 2026 | Arlington, TX

We went out to the property and replaced a failed TXV. After installation, we performed a pressure test to ensure system integrity, then pulled a deep vacuum down to 500 microns. Once the system held properly, we recharged and adjusted the refrigerant levels, adding 5 lbs and 7 oz. The system is now ...

June 22, 2026 | Weatherford, TX

Customer scheduled a maintenance service for their A/C system. We performed a full inspection, washed the outdoor condenser coil, secured the unit door back in place, and checked the system operation. The amp draw was within proper range, and everything is clean and running properly.

June 18, 2026 | Arlington, TX

Customer called because their thermostat was displaying an error code. Upon inspection, we found the thermostat batteries were weak and replaced them. We also checked the refrigerant levels, changed the filter, and inspected the system's operation. Everything is working properly at this time, and the system is cooling as expected.

June 18, 2026 | Burleson, TX

We performed a thorough cleaning of both the evaporator coils and the outdoor condenser coils to improve system performance and efficiency. After cleaning, we checked the system and confirmed everything is clean, operating properly, and cooling as it should.

June 17, 2026 | Burleson, TX

Customer scheduled a routine A/C maintenance visit and requested a new air filter. We completed the maintenance, replaced the filter, and inspected the system to ensure everything was working correctly. All equipment is operating normally and performing as expected.

June 17, 2026 | Burleson, TX

Customer called because their mini-split system was not cooling properly. Upon inspection, we found a failed capacitor that was preventing the system from operating correctly. We replaced the capacitor, checked the compressor amp draw, and cleaned the outdoor condenser coil. The system is now cooling properly and running as it ...

June 17, 2026 | Aledo, TX

Customer called to schedule an A/C maintenance service. We inspected the system and found all wiring to be in good condition, refrigerant levels within specifications, and the air filter clean. The capacitor tested within the proper range. We also cleaned the outdoor condenser coil to help maintain efficiency. The ...