The installation of split air conditioners is a critical job. If the task is conducted accurately, your AC system will offer optimum cooling, but if done wrongly, you will not get the preferred cooling effect. A poor split AC Installation in Burleson can also lead to regular maintenance problems. Therefore several aspects have to be outlined when installing a split air conditioner as directed by Bock Air Conditioning Services professional.
For the right cooling, the outdoor and indoor system for your split air conditioner unit should be located away from direct sunlight and water. The system must be installed in open spaces to ensure there is no interruption on the heat being dissipated from the capacitor.
The outdoor split AC unit should be placed on a rigid and flat surface. The unit holds vital components, including the compressor, fan, condenser, among others. Therefore if the unit is not placed within a flat surface, it might vibrate excessively causing breakage of copper pipes, condenser damage, and coolant leakage. Additionally, the vibrating units usually make lots of noise that could agitate you as well as your neighbors.
The distance separating the indoor and outdoor unit play a vital role in cooling. During low temperatures, the coolant circulates inside the copper tubes between the indoor and outdoor split units. During such a process, there is always some loss in cooling effect to the atmosphere, so to reduce the loss, keeping the separating distance between the two units as minimum as possible is advisable. The maximum allowable distance between the two units should be 15 meters.
Mounting the indoor system within a height of seven to eight feet above the ground is essential for adequate cooling inside your home. However, this can only be possible with the help of professional AC installers, and no one can do the task more perfectly than Bock Air Conditioning Services. Feel free to contact us for any air conditioning services, and you will surely not regret it.